The implication is that to persist the USB NIC bindings, you will need to follow the Persisting USB NIC Bindings section below. To prevent the PSOD, the following ESXi kernel option usbBusFullScanOnBootEnabled=0 is now the default and prevent the full bus rescan during bootup. When multiple USB NICs are connected and used with ESXi, an ESXi PSOD may occur. You will need to create a custom ESXi ISO that contains this driver and install ESXi prior to installing the USB Native Driver ESXi Fling. The built-in Intel NIC is not automatically recognized by ESXi and requires an updated ne1000 driver which can be found here. If USB NIC is not your primary NIC for the Management Network, then you do not have to disable Secure Boot Since the settings do not persist, you will need to create a startup script (see instructions below for more details details) and this is not allowed when Secure Boot is enabled. Note: Secure Boot can not be enabled if you decide to use the USB NIC as your primary NIC for Management Network. Once the host has rebooted, ESXi should automatically pickup and claim the USB NIC (e.g. Step 3 - Install the ESXi Offline Bundle (6.5/6.7) or Component (7.0)įor (7.0+) - Run the following command on ESXi Shell to install ESXi Component: esxcli software component apply -d /path/to/the component zipįor (6.5/6.7) - Run the following command on ESXi Shell to install ESXi Offline Bundle: esxcli software vib install -d /path/to/the offline bundle zip Step 4 - Plug-in the USB NIC and reboot for the change to go into effect. esxcli system maintenanceMode set -e true) Step 2 - Place the ESXi host into Maintenance Mode using the vSphere UI or CLI (e.g. Step 1 - Download the ZIP file for the specific version of your ESXi host and upload to ESXi host using SCP or Datastore Browser

Esxi install usb